Skip Navigation

Alcatel Speed Touch 510 Review

Routed IP Configuration File - With IPs [back to the review]

Disclaimer: This configuration worked for me when I had entered in the correct details. I cannot guarantee it will work for you. If it does not, you should contact your hardware provider who should be able to aid or point in the right direction for setting the router up.

Please note that you will need to obtain most of the information in red from your ISP. The IP addresses will be assigned by your ISP, and the one needed here is that for the router. The subnet mask specified in slash notation (/29) refers to a IP range. Check with your ISP what your range is rather than assuming  the /29 I have set. If you get this information wrong, the routing will not work (correctly). Please ensure this  is correct before examining what else is wrong.

To use this file (for editing yourself), download it here and save as a .ini file for uploading to the router. 

---- ---- include ---- ----
[ env.ini ]
set var=CONF_REGION value="UK"
set var=CONF_PROVIDER value=""
set var=CONF_DESCRIPTION value="PPPoA (always-on) no NAT, no DHCP."
set var=CONF_SERVICE value="Routed IP"
set var=CONF_DATE value="12 Mar 2002"
set var=CONF_VERSION value=""
set var=HOST_SETUP value="auto shortcut"
set var=DSL_ADDR value="0*38"
set var=PPPoA_userid value="username@isp"
set var=PPPoA_passwrd value="password"
set var=passwrd value="router_password"
set var=userid value="router_username"

[ phone.ini ]
add name=pppoa addr=0*38 type=ppp

[ qos.ini ]
add name=default class=ubr tx_peakrate=0 tx_sustrate=0 tx_maxburst=0 rx_peakrate=0 rx_sustrate=0

[ bridge.ini ]
config age=300

[ brfilter.ini ]

[ pptp.ini ]

[ dhcp.ini ]
config autodhcp=off scantime=20 spoofing=off trace=off
policy verifyfirst=off trustclient=on
spoof failtime=4 errorlt=60 dodlt=10

[ mer.ini ]

[ ppp.ini ]
ifadd intf=pppoa
rtadd intf=pppoa dst= src= metric=1
ifconfig intf=pppoa dest=pppoa user=
username@isp password=password proto=pppoa accomp=on addrtrans=no unnumbered=on status=up
ifattach intf=pppoa

[ cip.ini ]

[ nat.ini ]
bind application=ils port=1002
bind application=ils port=ldap
bind application=RAUDIO(PNA) port=7070
bind application=IRC port=6667
bind application=RTSP port=554
bind application=FTP port=ftp
bind application=H323 port=1720

[ pfilter.ini ]
chain delete chain=source
chain create chain=source
chain delete chain=forward
chain create chain=forward
chain delete chain=sink
chain create chain=sink
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=icmp icmptype=echo-reply action=accept
rule create chain=source index=2 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=sink index=0 srcintf=eth0 srcbridgeport=1 action=accept
rule create chain=sink index=1 srcintfgrp=!wan action=accept
rule create chain=sink index=2 prot=icmp icmptype=echo-request action=accept
rule create chain=sink index=3 action=drop

[ pfirewall.ini ]
assign hook=sink chain=sink
assign hook=forward chain=forward
assign hook=source chain=source

[ ip.ini ]
apadd addr= intf=eth0 type=1 
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=nat addrcheck=static mssclamping=on
ifconfig intf=loop mtu=1500 group=local
ifconfig intf=eth0 mtu=1500 group=lan
ifconfig intf=pppoa mtu=1500 group=wan

[ dnsd.ini ]
domain domain=lan
add hostname=SpeedTouch

[ dhcc.ini ]
config trace=off

[ system.ini ]
setpassword password=router_password
config upnp=on mdap=on

[ endofarch ]
---- ---- end include ---- ----

John Hunt

The contents of this review should not be relied upon in making a purchasing decision—You should always discuss your requirements with your service provider and hardware supplier.